1. MATERIAL
SAFETY DATA SHEET |
|
Trade name: STARREX
Supplier: Brightex Industries Pvt. Ltd.
24 & 25 Momand Plaza. Chowk Yadgar. Peshawar
N.W.F.P, Pakistan.
Ph.0092912551314 / 2550924 / 2550028 / 2218648
Fax.: 009291215435
E-mail: brightexpk@yahoo.com
/ sunpol@brain.net.pk
Web:
www.gliters.com |
|
2.
Composition/information on ingredients |
|
2.1
Chemical Characterization |
GLITTER
POWDER
|
|
|
2.2
Chemical ingredients |
Chemical name |
(%) |
CAS# |
Proportions |
POLYESTER FILM |
100% |
N/A |
109-16-0 |
|
|
3.
Hazards identification
|
|
|
|
|
4.
First aid measures |
|
General
information:
Remove from exposure area to fresh air immediately.
Perform artificial respiration if necessary. Keep
person warm and at rest. Treat symptomatically and
supportively. Get medical attention immediately.
After contact with skin
In case of contact with skin wash off immediately
with soap and Fresh Water |
|
5.
Fire-fighting measures |
|
Suitable
extinguishing media |
Sand
|
Water
spray jet |
Foam |
Carbon
dioxide |
|
|
6.
Accidental release measures |
|
Occupation
spill:
For large spills, sweep up with a minimum of dusting
and place into suitable clean, dry containers for
reclamation or later disposal.
Residue should be cleaned up using high-efficiency
particulate filter vacuum. |
|
7.
Handling and storage |
|
Observe
all federal, state and local regulations when storing
this substance.
Store in a tightly closed container.
Store away from incompatible substances. |
|
8.
Exposure controls/personal protection |
|
General
protective measures:
|
Do
not inhale dust
Avoid contact with eyes and skin
|
Hygiene
measures |
Keep
away from foodstuffs and beverages
|
Respiratory
protection: |
Dust
mask
|
Hand
protection: |
Safety
glasses
|
|
9.
Physical and chemical properties |
|
Description:
|
Odorless,
Fine Powder |
Melting
Point: |
Not
Available |
Vapor
Pressure |
No
Data Available |
Vapor
Density: |
Not
Applicable |
Specific
Gravity: |
1.4 |
Water
Solubility: |
Insoluble |
PH:
|
Not
Applicable |
|
|
10.
Stability and reactivity |
|
Reactivity:
Stable under normal temperatures and pressures.
Hazardous decomposition
Thermal decomposition may include toxic oxides of
cardon.
Polymerization:
Hazardous polymerization has not reported to occur
normal temperatures: |
|
11.
Toxicological information |
|
Local
effects: |
Irritant-
inhalation, skin. |
Acute
toxicity level: |
Slightly
toxic by ingestion. |
Target
effects: |
Poisoning
may affect the respiratory system, the heart,
skin And oral mucosa |
At
increased risk from exposure: |
Persons
with certain pre-existing upper respiratory
disorder, Such as bronchitis asthma. |
Acute
exposure: |
Direct
contact may cause irritation |
Acute
exposure: |
lids
and conjunctiva. Chronic exposure: |
|
Repeated
or prolonged contact with irritating material
may Cause conjunctivitis. |
|
|
12.
Ecological information |
Remarks
|
No
data can b given to the product’s insolubility
in water
|
|
13.
Disposal consideration |
Observe
all federal, state and local regulation when disposing
of the substance.
|
|
14.
Transport information |
|
ADR |
not
restricted |
RID |
not
restricted |
ADNR |
not
restricted |
IMDG |
not
restricted |
IATA |
not
restricted |
|
|
15.
Regulatory information |
|
NOTE:
This MSDS is true but only for information, which
doesn't means all coverage related to the product
safety matters. Brightex Industries Pvt. Ltd doesn't
take the responsibility of all damages due to these
products. |
|